Phobya Xtreme 200

An absolute highend radiator with a sharp price / performance ratio Phobya distinguishes these new radiator. The new offer Phobya addition to the excellent optics and high quality workmanship and absolute top cooling performance. The radiators Phobya the new Xtreme series are among the absolute high-end heat exchangers. The copper fins are specially optimized to Super Silent Fan (low flow). For a very low flow resistance to ensure the parallel channels. Ideal for large low speed fan of 180mm or more.

The highlight of this are the 2 removable radiator fan stops. On these screens are more fans M3 threaded holes around the compatibility of various fans and accordingly allow housing. Another idea would be these panels, respect only see 1x Mounting material available to the note at the end, mounting on both sides. This could be achieved with less speed and lower the resulting noise levels have the same cooling capacity. Conversely it would naturally be rausgeholt at full power even more cooling power!

The Phobya Xtreme 200 Radiator can also be operated passively, the performance is more than adequate for smaller systems. To this end, the aperture can be screwed to the fans, are simply omitted, so that the whole surface with the ambient air comes in contact and thus provide even better passive cooling!

The radiator is already 4x G1 / 4 inch threaded integrated, so that can fit all modern amenities. With the supplied black nickel-plated cap screws are not needed, the two openings can be closed.

Fan Compatibility:
Gate 1:
Hole size: 180mm
Fan type: Silverstone

Aperture 2:
Hole size: 240
Fan type: ichbinleise

Hole size: 210 & 220mm
Fan type: Cooler Master Mega Flow

Hole size: 210
Fan type: Yate Loon

Specifications:
Material: Copper, brass auricles
Color: Matt black completely
Dimensions: (L x W x H): 245x200x36mm
Connections: G1 / 4 "
Weight: about 800g
Mountability: from both sides for fan or as a holder
Screw Thread Size: M3
Fan Size: 1x 180-225mm
Airtight: 2 Bar
Other: bleed screw

Delivery:
1x Radiator
4x M3x30mm screws
4x screws M3x5mm
2x fan stops
2x black cap screws

Note Assemble: To simultaneously on both screens, including additional screws needed: 4x 6mm M3 as CODE: 94567 and 4x 30mm M3 e.g. No.: 94570